EVS XSnano, Configuration Manual

Page: 118 / 198

Collective Editing Actions in Server- and Web-Based
Interfaces
You can apply the following editing actions to all audio channels of a page using the
following shortcuts, when available on the current page:
Command description
Command key
(Server-based
app.)
Command button
(Web-based interface)
Set all audio channels to Embedded CTRL+E all E
Set all audio channels to Digital CTRL+D all D
Set all audio channels to Analog CTRL+A all A
Set all audio channels to Embedded
Dolby E or Digital DolbyE CTRL+Y all EY/DY
Set all audio channels to None CTRL+N all None applicable to all
E,D or A outputs at a time
Reset all the audio configuration (also
on other pages) to default values F5 -
Route all audio input channels of
REC1 to the other record channels
(only audio inputs) CTRL+0 Rec 1 on all
Validating the changes ALT+A Apply
Individual Editing Actions in the Server-Based Application
In the server-based application, use the general editing commands for modifying individual
field/cell values (audio type or audio routing):
Command description Command key
Selecting a field value TAB
Scrolling down in the list of the possible values for the
selected field SPACEBAR
Scrolling up in the list of the possible values for the selected
field SHIFT + SPACEBAR
108 3. Multicam Configuration
EVS Broadcast Equipment SA Issue 12.02.C - April 2014