EVS XSnano, Configuration Manual

Page: 26 / 198

2. If requested, change the name of the folder the configuration lines will be exported to:
◦ By default, the folder name, displayed in the upper right corner, follows the
pattern: <server facility name_current date> where the date has the YYMMDD
format.
◦ To change the export folder name, type the requested name. You can do this any
time in the procedure.
3. If requested, change the selection of configuration lines selected for export on the left
pane:
◦ By default, a cross is displayed in front of all configuration lines, which means
they are all selected for export.
◦ To deselect a line, use the UP ARROW or DOWN ARROW key to highlight the
requested line, and press SPACEBAR . The cross is removed, and the
deselected lines turn light gray.
4. Press TAB to shift the focus to the right pane.
5. If requested, change the location where the export folder will be created:
◦ By default, the export folder is created on the USB key root or on the local drive
folder the local drive folder
C:/LSMCE/DATA/SETUP/USER
.
◦ To change the folder where the export folder will be created, highlight the
requested folder. The last highlighted folder will be considered as the requested
location.
6. To start the export process, press ENTER .
7. When the selected lines are exported (as a .lin file), a message opens to confirm the
export. Click OK to acknowledge the message.
In the Web-Based Interface
Note
In the web-based interface, it is only possible to export configuration lines one
by one.
To export configuration lines from an EVS server in the web-based interface, proceed as
follows:
1. From the Multicam Setup window, click Export configuration lines in the Tools
menu.
The Export configuration lines window opens:
16 2. Multicam Setup
EVS Broadcast Equipment SA Issue 12.02.C - April 2014