manualshive.com logo in svg

EVS XSnano, Configuration Manual

The EVS XSnano Technical Reference Hardware Manual is a valuable resource for users seeking in-depth knowledge about the product. This comprehensive manual provides detailed instructions and insights on the device's features and functionalities. Download it for free from our website to enhance your understanding of the EVS XSnano.

Share
Download
background image

The following screenshot displays the Audio settings and Audio Monitoring settings
defined on the Channels tab in the web-based interface:

Audio Connectors

Description

Type of connectors available in the hardware configuration.
The audio formats available on the EVS server, and in the
Advanced audio settings pages, depend on the audio
hardware configuration.
Note that the values defined on this field are not validated
against the real hardware configuration.

Values

The following table shows the available audio hardware
configurations, and the available audio formats based on this
hardware configuration:

Hardware configuration

Available formats

•

None

E (Embedded)
EY (Dolby E Embedded)

•

16 BNC D + 4 DB 15 A

E - EY - A - D - DY

•

4 DB 15 D + 4 DB 15 A

E - EY - A - D - DY

Number of Tracks

Warning

A change to this parameter requires an application reboot (

ALT+Q

from the

operational windows) to be taken into account.

Description

Number of mono audio tracks associated to each video
channel.

Values

4 Monos (default), 8 Monos or 16 Monos

96

3. Multicam Configuration

EVS Broadcast Equipment SA

Issue 12.02.C - April 2014

Summary of Contents for XSnano







































































































































































































Reviews:

No comments

Related manuals for XSnano

Xerox EX Printing Manual preview
EX
Brand: Xerox Pages: 40
Xerox CX PRINT SERVER 550 User Manual preview
CX PRINT SERVER 550
Brand: Xerox Pages: 166
IBM Flex System x440 Compute Node Installation And Service Manual preview
Flex System x440 Compute Node
Brand: IBM Pages: 584
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
Xantech XMUSICWP User Manual preview
XMUSICWP
Brand: Xantech Pages: 52
Longshine LCS-C844 User Manual preview
LCS-C844
Brand: Longshine Pages: 56
H3C UniServer BT716F User Manual preview
UniServer BT716F
Brand: H3C Pages: 44
Leightronix UltraNEXUS-HD X5 Product Quick Manual preview
UltraNEXUS-HD X5
Brand: Leightronix Pages: 5
Intermec Norand 6920 Reference Manual preview
Norand 6920
Brand: Intermec Pages: 232
Crestron CEN-RVS-R210 Quick Start Manual preview
CEN-RVS-R210
Brand: Crestron Pages: 2
Infrant Technologies ReadyNAS Duo User Manual preview
ReadyNAS Duo
Brand: Infrant Technologies Pages: 98
7th Sense Delta User Manual preview
Delta
Brand: 7th Sense Pages: 156
TechnipFMC Proline Promass 500 Manual preview
Proline Promass 500
Brand: TechnipFMC Pages: 32
Alcatel-Lucent OmniTouch 8460 Specifications preview
OmniTouch 8460
Brand: Alcatel-Lucent Pages: 4
Planet FPS-1012N User Manual preview
FPS-1012N
Brand: Planet Pages: 141
Symmetricom TimeProvider 5000 User Manual preview
TimeProvider 5000
Brand: Symmetricom Pages: 534
Tektronix 5 Series Service Manual preview
5 Series
Brand: Tektronix Pages: 50
Intel TIGPT1U - Carrier Grade Server Specification preview
TIGPT1U - Carrier Grade Server
Brand: Intel Pages: 89

Brands by name

Popular brands

Load more brands