EVS XSnano, Configuration Manual

Page: 78 / 198

Recording and Editing Rules
• When the server is configured in multi-essence mode, the clips shall be created in
each active essence.
• In general, all editing actions on clips are applied seamlessly on all active essences of
the clip.
Playout Rules
• Only one essence can be played out at a time. The codec used for playout is specified
in the Server tab, after the codec sections.
• When the Intra essence is in use on the server, this essence shall be played out.
Otherwise, the LongGOP essence will be played out.
• If the on-air essence is not available, a black clip shall be displayed.
Codec Settings
Introduction
From Multicam 12, the XSnano server can encode, at a time, a record train in one or two
different codec types, which are called essences.
Possible Codec Sections
The codec settings are organized in three codec sections, which correspond to the
essences you can activate on the XSnano server.
Only the codec sections corresponding to the essences available on the EVS server will
be displayed. See section "Codec Availability" on page 71 for more information on the
availability of a given codec and/or codec section.
The following codec sections can be available:
• Codec Intra: It is always displayed as at least an Intra codec is available.
• Codec LongGOP: It is displayed when the LongGOP essence is available.
User Interface
The Codec settings are available on the Server tab in the server-based application (1
st
page) and web-based interface. These settings are not available in the Technical Setup
menu of the Remote Panel.
Warning
The Codec settings require an application reboot ( ALT+Q from the operational
windows) for changes to be taken into account.
68 3. Multicam Configuration
EVS Broadcast Equipment SA Issue 12.02.C - April 2014