EVS XSnano, Configuration Manual

Page: 132 / 198

Net Name
Description Machine name on the SDTI network.
It is not mandatory. It can however be useful to easily identify
the servers running a given configuration, as it is tied to the
running configuration.
The Net Name will be displayed even if the SDTI code is not
valid.
Values The Net Name is user-defined and cannot exceed 8
characters.
Default Values By default, no Net Name is assigned.
3.5.3. Gigabit Settings
Introduction
The Gigabit connection allows the backup and transfer of the audio and video data without
going through the SDTI network.
It is provided via one of the following interfaces:
• the H3X or HCTX board, whose backplane is equipped with two 1GbE ports
The settings need to be defined on at least one port for the server to be able to operate the
Ethernet connection.
When the Gigabit module is not present on the H3X or HCTX board or when the Gigabit
connection has been lost, the first line of the Gigabit Ethernet settings will display the
message
!Not detected!
.
Warning
Changes to the Gigabit settings require an application reboot ( ALT+Q from the
operational windows) to be applied.
User Interface
The Gigabit IP Configuration settings are available:
• in the Multicam Configuration window, Network tab, in the basic and advanced
display modes on page 1 in the server-, and web-based interface.
• in the Technical menu of the Remote Control Panel (T3.X).
The following screenshot displays the Gigabit IP Configuration settings on the Network
tab in the web-based interface:
122 3. Multicam Configuration
EVS Broadcast Equipment SA Issue 12.02.C - April 2014