EVS XSnano, Configuration Manual

Page: 110 / 198

The values in the cells of the table, for example 'E1-01', are made up as follows:
• The first letter refers to the audio type (E for embedded, D for digital, A for analog, DY
for Dolby Digital, EY for Dolby Embedded).
• The first number before the hyphen refers to the play or record channel.
• The figure after the hyphen refers to the audio mono channel.
Audio Input Settings
Introduction
The advanced audio input settings allow users to specify the following elements:
• Which type of audio source should be taken into account in the recording process.
• How the audio mono channels of the source material will be distributed to the material
recorded on the EVS server.
• Whether an audio gain or audio muting should be applied in the recording process.
Example 1
The E2-03 value located in the intersection between row 3 and column IN2 means that the
3
rd
audio mono channel of the embedded audio source plugged into the IN2 (CAMB)
connector will be recorded on the same position on the EVS server.
100 3. Multicam Configuration
EVS Broadcast Equipment SA Issue 12.02.C - April 2014