manualshive.com logo in svg

EVS XSnano, Configuration Manual

The EVS XSnano Technical Reference Hardware Manual is a valuable resource for users seeking in-depth knowledge about the product. This comprehensive manual provides detailed instructions and insights on the device's features and functionalities. Download it for free from our website to enhance your understanding of the EVS XSnano.

Share
Download
background image

Overview on the Raid Configuration Window

The Raid Configuration window is available from the Multicam Setup window, when
pressing

R

to call the

Raid Configuration

command in the

Tools

menu:

The Requested Configuration area, in the upper part of the window, displays the default
raid configuration. You can modify the default raid configuration in this area. You will find
more information on editable parameters below.

The Current Configuration area, in the lower part of the Raid Configuration window,
provides raid and disk status information.

Default Raid Configuration

At the first start, the software builds the raids using the following settings:

•

If internal and external storage are detected, both are used.

•

(5+1) raid configuration with a maximum of 5 spares is used. First, all the raids are
built. The remaining disks are used as spare disks. The construction of raids starts
with internal arrays and carries on with external arrays. A raid can be created across
several hardware arrays.

Requested Raid Configuration

Overview

In the Requested Raid Configuration, you can modify the following parameters in the
default raid configuration:

•

Use of internal and/or external storage.

•

Use of spare disks.

•

Number of raids to be used.

To modify one of these parameters, press

TAB

to select the requested field, and

SPACE BAR

to select the requested value, or type the requested value.

CONFIGURATION MANUAL XSnano Server 12.02

2. Multicam Setup

29

Summary of Contents for XSnano







































































































































































































Reviews:

No comments

Related manuals for XSnano

Far south networks Com.X1 PBX Getting Started preview
Com.X1 PBX
Brand: Far south networks Pages: 4
H3C UniServer T1100 G3 Operating System Installation Manual preview
UniServer T1100 G3
Brand: H3C Pages: 66
H3C UniServer R6900 G3 User Manual preview
UniServer R6900 G3
Brand: H3C Pages: 214
H3C UniServer R6700 G3 User Manual preview
UniServer R6700 G3
Brand: H3C Pages: 151
H3C UniServer R4900 G5 Installation, Quick Start preview
UniServer R4900 G5
Brand: H3C Pages: 16
Bull NovaScale R410B F2 Getting Started preview
NovaScale R410B F2
Brand: Bull Pages: 38
Supermicro SuperServer 1029P-MT User Manual preview
SuperServer 1029P-MT
Brand: Supermicro Pages: 123
Sun Microsystems Ultra Enterprise 3000 Installation Manual preview
Ultra Enterprise 3000
Brand: Sun Microsystems Pages: 48
xFusion Digital Technologies FusionServer XH321 V5 Manual preview
FusionServer XH321 V5
Brand: xFusion Digital Technologies Pages: 76
3onedata NP301 Quick Installation Manual preview
NP301
Brand: 3onedata Pages: 3
Johnson Controls Rackmount 5000 Series Quick Installation Manual preview
Rackmount 5000 Series
Brand: Johnson Controls Pages: 42
Arista NetVisor UNUM High Capacity Appliance User Manual preview
NetVisor UNUM High Capacity Appliance
Brand: Arista Pages: 81
Cabletron Systems Access Server 316 Hardware Owner'S Manual preview
Access Server 316
Brand: Cabletron Systems Pages: 70
Planet FPS-3121G User Manual preview
FPS-3121G
Brand: Planet Pages: 74
Dataton WATCHPAX 40 User Manual preview
WATCHPAX 40
Brand: Dataton Pages: 23
Meinberg LANTIME IMS-M500 Manual preview
LANTIME IMS-M500
Brand: Meinberg Pages: 63
ICP DAS USA PDS-8 1 Series Manual preview
PDS-8 1 Series
Brand: ICP DAS USA Pages: 9
Adaptec Storage Manager User Manual preview
Storage Manager
Brand: Adaptec Pages: 188

Brands by name

Popular brands

Load more brands