EVS XSnano, Configuration Manual

Page: 51 / 198

In the Server-Based Application
To clear video disks in the server-based application, proceed as follows:
1. In the Multicam Setup window, press C to call the Clear Video Disks command.
2. Select one of the available options and press ENTER .
A confirmation message is displayed.
3. Press RIGHT ARROW , and ENTER to select Yes and validate the deletion
OR
Press ENTER to cancel the deletion.
Note
After a Clear Video Disks action, the command toggles to Undo Clear Video
Disks At Next Start as long as your server has not been rebooted after the
Clear Video Disks command. This allows you to cancel the Clear Video
Disks request.
In the Web-Based Interface
To clear video disks in the web-based interface, proceed as follows:
1. In the Multicam Setup window, click the Clear video disks command from the Tools
area to open the Clear Video Disks window.
2. Select one of the available options and press OK .
A confirmation message is displayed.
3. Click Yes to validate the deletion or No to cancel the deletion.
2.5.5. Exporting Log Files
When the EVS support team requests the log files to investigate an issue, you can export
the log files to a plugged-in USB key by pressing the
X shortcut key from the Multicam
Setup window.
When you call the Export log file command, a .zip file is created on the root folder the
USB key. It contains:
• all files and folders located on
C:\LSMCE\DATA
folder of the EVS server
• an Excel spreadsheet that contains the definition of your configuration lines
After the export action, a message box asks you whether you want to delete the logs on
the EVS server. If you answer 'Yes', the content of the folders
C:\LSMCE\DATA\LOG
and
C:\LSMCE\DATA\DUMP
are deleted.
You can also export log files from XNet Monitor. For more information, refer to the XNet
Monitor user manual.
CONFIGURATION MANUAL XSnano Server 12.02
2. Multicam Setup 41