EVS XSnano, Configuration Manual

Page: 149 / 198

GPI Types and Functions
There are 3 types of GPIs available to be used on the servers:
• The input lines 1 to 4 are opto-isolated inputs.
• The output lines 1 to 4 are relay outputs.
• The GPIs TTL lines can be configured as 4 TTL inputs or 4 TTL outputs, in both cases
numbered from 5 to 8.
According to the protocol you are using, the following functions are available and can be
assigned to the GPIs lines as described hereunder in the
Function parameter.
• Sony : Play, Pause, Recue, Previous, Next, Skip.
• DD35 : Play, Pause, Recue, Previous, Next, Skip.
• Odetics : Play, Pause, Recue, Next.
• VDCP : Play, Pause, Recue, Previous, Next, Skip.
Note
For all protocols, use the channel assignment (PGM1 to PGM4) instead of the
device protocol type (Sony BVW75, Odetics).
TTL GPIs set as GPIs
Description Defines the 4 configurable GPIs as inputs or outputs.
Values In / Out
Default value In
GPIs IN - Channel/Device
Description Specifies the server channel or the external device connected
to the corresponding GPI input line, and therefore to which
channel or device the GPI will be sent to.
Values The following values are possible and correspond to one of the
channels or controllers assigned in the Channel and Control
settings (Channels tab, page 1):
• PGMx : The GPI is sent to the specified play channel.
• RECx : The GPI is sent to the specified record channel.
• RMTx : The GPI is sent to the remote controller.
• <Protocol Name> : The GPI is sent to the third-party
controlling device.
CONFIGURATION MANUAL XSnano Server 12.02
3. Multicam Configuration 139