manualshive.com logo in svg

EVS XSnano, Configuration Manual

The EVS XSnano Technical Reference Hardware Manual is a valuable resource for users seeking in-depth knowledge about the product. This comprehensive manual provides detailed instructions and insights on the device's features and functionalities. Download it for free from our website to enhance your understanding of the EVS XSnano.

Share
Download
background image

External Array Status

This section displays the status of each external array and potential alerts:

Status

Meaning

OK

No alert

PSU1!, PSU2!

Problem with a power supply unit

FAN1!, FAN2! or FAN3!

Problem with a fan

Disk Status

This section provides a representation of the disks contained in the external and/or
internal arrays, as well as their status, which can be as follows:

Color Code

Raid Status

Light gray

OK: The disk is connected in a raid.

Red

Disconnected: The disk is physically present but disconnected by the
software.

Orange

Rebuilding: The disk is being rebuilt.

Green

Spare: The disk is connected but is not included in a raid.

gray dashes

Not present: The disk is not physically connected to the hardware.

How to Change the Disk Status Display

Based on the selection made in the

Display

field, two types of representations are

available: by disk number or by raid number. Users can change the option by using the
Spacebar, the plus (+) and minus (-) keys, as well as the arrow keys.

CONFIGURATION MANUAL XSnano Server 12.02

4. Monitoring

173

Summary of Contents for XSnano







































































































































































































Reviews:

No comments

Related manuals for XSnano

A10 Networks AX Series Deployment Manual preview
AX Series
Brand: A10 Networks Pages: 17
Autonomic Mirage MMS-1e Setup Manual preview
Mirage MMS-1e
Brand: Autonomic Pages: 17
Rasilient ApplianceStor 90 User Manual preview
ApplianceStor 90
Brand: Rasilient Pages: 42
JIEYUN TECHNOLOGY J60 User Manual preview
J60
Brand: JIEYUN TECHNOLOGY Pages: 25
Planet NAS-7102 User Manual preview
NAS-7102
Brand: Planet Pages: 68
Lantronix C 7/01 User Manual preview
C 7/01
Brand: Lantronix Pages: 40
Lantronix EPS Reference Manual preview
EPS
Brand: Lantronix Pages: 223
Digitus DN-7025 Quick Installation Manual preview
DN-7025
Brand: Digitus Pages: 8
Intel S2600KP Configuration Manual preview
S2600KP
Brand: Intel Pages: 31
Gigabyte R282-2O0 User Manual preview
R282-2O0
Brand: Gigabyte Pages: 106
FieldServer Fike Cheetah FS-8700-48 Driver Manual preview
Fike Cheetah FS-8700-48
Brand: FieldServer Pages: 36
Digitus DN-13014-3 User Manual preview
DN-13014-3
Brand: Digitus Pages: 92
Inspur NF5180M4 User Manual preview
NF5180M4
Brand: Inspur Pages: 92
Inspur OB5161M5 User Manual preview
OB5161M5
Brand: Inspur Pages: 115
Inspur NF5486M5 User Manual preview
NF5486M5
Brand: Inspur Pages: 142
Gigabyte R182-N20 User Manual preview
R182-N20
Brand: Gigabyte Pages: 114
LaCie 301417U - Big Disk Network NAS Server User Manual preview
301417U - Big Disk Network NAS Server
Brand: LaCie Pages: 48
Supermicro SUPERSERVER 6014H-32 User Manual preview
SUPERSERVER 6014H-32
Brand: Supermicro Pages: 126

Brands by name

Popular brands

Load more brands