EN
129
How would it be used?
• Press freezer button for 5 seconds.
• Special animation will start on freezer set value screen and 05 will blink on cooler set
value screen.
• Press cooler button to adjust the time (05 - 10 - 15 - 20 - 25 - 30 minutes).
• When you select the time the numbers will blink 3 times on screen and sound beep
beep.
• If no button is pressed within 2 seconds the time will be set.
• The countdown starts from the adjusted time minute by minute.
• Remaining time will blink on the screen.
• To cancel this mode press freezer set button for 3 seconds.
1.2.6 Screen saver mode
How would it be used?
Purpose
• This mode saves energy by switching off all control panel lighting when the panel is
left inactive.
How to Use
• Screen saver mode will be activated automatically after 30 seconds.
• If you press any key while the lighting of the control panel is off , the current machine
settings will reappear on the display to let you make any change you wish.
• If you do not cancel the screen saving mode or press any key for 30 seconds, control
panel will remain off .
To deactivate the screen saving mode,
• To cancel the screen saving mode, fi rst of all, you need to press any key to activate
the keys and then press and hold the Mode button "
" (#5) for 3 seconds.
• To reactivate screen saving mode, press and hold the mode button "
" (#5) for 3
seconds.
HOW TO OPERATE THE APPLIANCE
Summary of Contents for RBE 27ETC61 FV
Page 147: ...52276944 ...
