46
GB
10. DORT (CAKE)
The program is intended for kneading/mixing of ingredients (e.g. for cake) then baked for
a set time. We recommend first mixing the ingredients into two portions and pouring them
to the baking pan. Cake size may not be set in this program.
11. SENDVIČ (SANDWICH)
This program is intended for baking of light bread with soft and rough crust.
12. PEČENÍ (BAKING)
The program is intended for baking of brown bread, cakes or mincemeat. The program is
preset to 10 minutes. However, baking time may be adjusted by the - + (TIME) button if
needed. Max baking time is one hour. Bread size may not be set in this program.
IV. BREAD MAKER FUNCTIONS
The beep sound will activate:
–
if you press any of the program buttons (one short or long beep or two short beeps) and
the display will illuminate for about 20 seconds;
–
during the second kneading cycle of programs
1-KLASIK (CLASSIC), 2-TOASTOVÝ
(TOAST), 3-CELOZRNNÝ (WHOLE WHEAT), 4-RYCHLÝ (QUICK), 5-SLADKÝ
(SWEET), 6-BEZLEPKOVÝ (GLUTEN-FREE), 7-SUPER RYCHLÝ (SUPER FAST),
10-DORT (CAKE)
signalling that cereals, fruits, nuts or other ingredients may be added
(10 beeps):
–
when the program set is completed (10 beeps),
–
when the one-hour keeping warm set is completed (1 beep),
–
when the safety function activates (continuous beeping).
Safety function
–
If you want to use the bread baker immediately after previous baking and if the
appliance baking space temperature is too high (
over 45 °C
), pressing the
START/
STOP
button will show
HHH
on the display and continuous beeping will be heard. The
appliance may not be operated. Therefore, open the lid or remove the baking pan and
wait for cooling the appliance down (does not apply to program 9, 12).
–
If
EEO
appears on the display following the
START/STOP
button is pressed, bring the
appliance to a service centre.
–
If
LLL
appears on the display and a beep signal (5 beeps) is heard following the
START/STOP
button is pressed, the temperature of the baking pan is too low. The
bread maker must be put into a warmer place and must be left there to acclimatize
(does not apply to program 9,12).
–
In case of power failure during operation, the appliance remembers the program setup
for about ten minutes. In case of power failure for more than 10 minutes (the display
shows basic settings), the process will not recover and the bread baker must be turned
on again. This is possible only when the program was not interrupted later than during
the kneading phase. Then, you can continue by setting your own program (delete
already finished working cycles). However, if the dough was in the last rising phase and
the power failure lasts for longer time, the dough may not be used again and restart with
new ingredients is required.
–
Please note that for safety reasons the bread maker does not have upper heating and
therefore, upper bread crust is not as dark as from the bottom and all sides
.
