12
Kongsberg XL
3.
Tool position 3
4. Laser Pointer
5.
Measuring foot / material hold down foot
6.
Electrical connection, reciprocating motor
Tool Adjustments, PowerHead
Tool Height
Correct tool height relative to table top
Lag Setting
The lag value depends upon the blade adapter. Nominal value is 0 mm.
Tool Rotation
Adjust tool angle tangential to moving direction
Center Offset
Adjust tool sideways until centered
Tool Offset
Adjust offset to
Laser Pointer
.
For more information about how to run the adjustment wizards, see
Working area
The working area is reduced with 62 mm (2.4") in Y for tool position 1.
Note: When running with V-notch knife in tool position 3, the working area is slightly reduced
due to the slanted angle used when tool down.
Back score and PowerHead
To be able to run a job including back score, you have to establish a fixed reference point at a
position reachable for all tools.
This is done by adding a fixed reference point ( Ref point no 2 for example ) a distance Y > 62
mm from the Main reference point on the table.
Use this reference point when performing back score operations.
12.6.1. ø150 mm Crease Wheel
This
Crease Wheel
has the equivalent of 50kg [110lb.] of down-pressure.
67
