1
Kongsberg XL
1. Preface
User Manual
for
Kongsberg XL
running
i-cut Production Console
Note:
We remind you that only the Esko Staff, or persons having received appropriate training,
are allowed to handle, manipulate or do repairs on the system.
Note:
Original instructions are in English. Instructions in other languages are translations of
original instructions.
Disclaimer:
Do not operate this equipment in an EU member State if the Instructions are not
written in that State's language. Contact Esko if a translation is needed.
©
Copyright 2020, Esko-Graphics Kongsberg AS, Norway
All Rights Reserved.
This copyright does not indicate that this work has been published.
This material, information and instructions for use contained herein are the property of Esko-Graphics
Kongsberg AS. There are no warranties granted or extended by this document. Furthermore, Esko-Graphics
Kongsberg AS does not warrant, guarantee or make any representations regarding the use, or the results
of the use of the system or the information contained herein. Esko-Graphics Kongsberg AS shall not be
liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use
the system or the information contained herein. The information contained herein is subject to change
without notice. Revisions may be issued from time to time to advise of such changes and/or additions.
No part of this system may be reproduced, stored in a data base or retrieval system, or
published, in any form or in any way, electronically, mechanically, by print, photoprint, microfilm
or any other means without prior written permission from Esko-Graphics Kongsberg AS.
This document supersedes all previous dated versions.
Correspondence regarding this publication should be forwarded to:
Global support
Esko-Graphics Kongsberg AS
Document no:
D3625
Part no:
32597601
Esko-Graphics Kongsberg AS
www.esko.com
P.O.Box 1016, NO-3601 Kongsberg, NORWAY
Tel.: +47 32 28 99 00
7
