10
Kongsberg XL
5
7
w
10.2.
Adjust X1 to X2 Angle
Machine Connection
->
Machine Configuration
->
Installation
_>
Adjust X1 to X2
Angle
Use this wizard to obtain correct angle between X axis and Y axis.
Typical use is after maintenance or repair.
Procedure:
1.
Execute the
Adjust X1 to X2 Angle
function.
2.
Follow the instructions exactly as given by
the wizard.
Note: Select a set of drilled vacuum holes (1
and 2) in the
table top
as reference.
10.3.
Register Table Size
Machine Connection
->
Machine Configuration
->
Installation
_>
Register Table Size
This wizard moves the
Tool Head
from edge to edge of the
Cutting Table
in order to measure
the table size.
Typical use is after maintenance or repair.
Procedure:
1.
Execute the
Register Table Size
function.
2.
Follow the instruction given by the wizard.
48