12
Kongsberg XL
• Adjust the cutting width (W) by the adjustment parameter Width Offset. Nominally, the
width of the cut has to be increased by Width Offset = - 2 x bottom liner thickness.
• Width Offset limitations: -50 mm < Width Offset < +10 mm / -2 in < Width Offset < +0.4 in.
• Decide if
Waste
Cut
function
is needed, mostly needed for corrugated plastics.
This illustration shows how the parameter dW is used to ensure a nice folding result.
Waste Cut
function, adjustment
This illustration shows a typical use of
Triple
Cut Function
.
The middle wall is not cut by (2) or (3), making
the material impossible to fold.
The
Triple Cut Function
(1) cut the middle
wall and you can fold the material nicely.
Adjustment sign and cut direction
12.6.6. Bevel Knife 45
Bevel Knife
is a special-purpose tool for 45
degree angled cuts.
Lag = 3.5 mm / 0.14 in.
For more information, see chapter
77
