12
Kongsberg XL
12.8.2. Tool Head description
MultiCUT
1.
Tool position 1 (
FlexiHead
tool insert)
2.
Tool position 2 (
FlexiHead
tool insert)
3.
Laser pointer
4.
Tool position 3
5.
Measuring foot / material hold down foot
6.
Electrical connection, router spindle motor
7.
Electrical connection, reciprocating motor
8.
Suction hose
1.
Suction house with brush for chip removal. During normal operation, the house is in down
position. When changing bit, the house should be locked in its upper position.
2.
Air blow adjustment. Air blow is used for router bit cooling and to ease chip removal. Adjust
for proper operation. There is also an air blow inside the spindle, but no user adjustment is
necessary.
3.
Warning lamp for spindle running.
4.
Chuck open/close. The shown position is closed. Note: Ensure there is a router bit inserted
when the chuck is closed.
82
