8
Kongsberg XL
8. Prepare for a Job
8.1. Introduction
Keep away from
Moving Parts
during operation.
Do not lean on
Racks
,
Guide Ways
or
Traverse
during operation, as this may
cause personal injury.
Before starting any operation, make sure that:
• The Table is free from obstructions
• No unauthorized personnel come close to the table
The
Starting Point
in this procedure is to
Create a Job
from a file already available in
My Jobs
List
.
Detailed information about the complete iPC workflow is available in the following manuals:
•
User Manual for i-cut Production Console
.
•
Get the best out of iPC 2.0
.
Here, a step by step procedure is provided that can be used as a check list.
8.2. Main Reference Point in iPC
In XL-Guide, the
Main Reference Point
was in
Main Zero point 1
in the figure above.
This point was as well the lower left corner of the available
Work Area
.
32
