9
Kongsberg XL
Workflow
Step 1 - the sheet is aligned towards the
Right Ruler
.
Reverse Operations
are completed.
Step 2 - the sheet
flipped
and aligned towards
the
Left Ruler
.
The rest of the
Job
is completed.
A typical use of
Reverse Operation
is when you want to add a
Crease
line on the front side of
a material that you normally prepare from the rear side.
This function requires that the table has
Left and Right Rulers
physically mounted and
selected in
HW configuration
, and that the job is without
Regmarks
.
9.4.2. Reverse Operation by use of Camera
Workflow
Step 1 -
Regmarks
and corners are read by
the Camera.
Step 2 - the sheet is
flipped
(turned or
tumbled), and corners are read by the
Camera.
44
