11
Kongsberg XL
See the description of each
Tool Type
for more specific information:
We recommend using a sheet of
Folding Carton
material, 5-6 mm / 0.2 inch, when executing
the adjustments.
Note: All tools need to be adjusted in the position they will be used.
Before any adjustment, complete a
Table Top Reference
function:
Menu Bar
->
Machine
->
Set Table Top Reference
Machine Panel Toolbar
->
Table Top Reference
11.3. Tool Height Calibration
1.
Select the
Tool
to be adjusted
2.
Press the
Adjust Active Tool
button to enter the wizard selection dialog.
3.
Select
Tool Height Calibration
4.
Follow the instructions given by the wizard, step by step.
5.
Repeat the procedure for all tools.
11.4. Lag Settings (for Rotating Tools)
1.
In the
Configure Tool dialog
, select the tool to be adjusted.
2.
Press the
Adjust Active Tool
button to enter the
Wizard
Selection dialog
.
3.
Select
Lag Settings
4.
Follow the instructions given to enter correct values.
5.
Repeat the procedure for all rotating tools.
56
