12
Kongsberg X-series
Waste Cut
Waste
Cut
adds a third cut line to ease removal of
waste
Geometry
When the knife angle is 45
o
and you cut through
the material, the width of the cut is W = 2 x h.
Folding
If you prepare a material for folding, the following rules applies:
• Adjust the cutting depth to just above the bottom liner.
• Adjust the cutting width (W) by the adjustment parameter Width Offset. Nominally, the width of the
cut has to be increased by Width Offset = - 2 x bottom liner thickness.
• Width Offset limitations: -50 mm < Width Offset < +10 mm / -2 in < Width Offset < +0.4 in.
• Decide if
Waste
Cut
function
is needed, mostly needed for corrugated plastics.
This illustration shows how the parameter dW is used to ensure a nice folding result.
Waste Cut
function, adjustment
86
