19
Kongsberg X-series
Machine Identification
The
Motorized Roll Feeder
has an identification label, a typical label is shown in the picture.
The identification label is positioned on the right side of the machine, where the power cable is
entering the machine.
19.2. Safety regulations
The manufacturer's responsibility
The Manufacturer is responsible for delivering the system according to Safety Regulation standards.
The owner's responsibility
The owner is responsible for:
• Ensuring that the system is used for its intended use only
• Allowing that only authorized and trained personnel operate the system
• Preventive maintenance as described in the
Maintenance manual
• That Local Regulations regarding installation and operation are fulfilled
The operator's responsibility
The operators are responsible for:
• Operating the system only when it is in a flawless state
• Operating the system according to the
User manual
• Ensuring that no unauthorized personnel come close to the system
Requirements to be met by the operators
Personnel operating the system must:
• Be adequately trained
• Have read and understood the instructions described in Safety Regulation as well as any other
safety warnings
Definitions of use
In this manual, intended use is described in the following sections:
• General Operation
195
