13
Kongsberg X-series
During processing, the corrugated
material is partly crushed by the foot.
The result is:
• You can run at high speed.
• The risk for material tear is
significantly reduced.
Foot pressure adjustment
Material crushing depends upon two
adjustments:
A - Knife tip exposed
Adjust until the distance d is 1.0
mm/0.04 in. less than material
thickness.
One turn (CW) on A increase d with 1
mm/0.04 in.
B - Foot pressure
Adjust foot pressure.
C - scale indicating actual pressure.
For optimal performance, the foot pressure must be adapted to each material.
Run some test cuts to find the best combination of knife tip exposure and foot pressure.
Start with foot pressure = 5 and test with different knife tip exposures.
By this, you can find and save settings that are optimal for each type of material.
Insert Knife Blade
136
