7
Kongsberg X-series
To switch off the PC, use the
Operating System
shutdown procedure..
7.4. Continue after Safety Break
If the
Safety System
is activated, all movements on the table are stopped and the
Warning Lamp
starts
flashing.
To continue operation, proceed as follows:
1
Ensure the table is free from obstructions and ready for operation.
2
Reset the
Safety System
by pressing the
Pause
pushbutton.
3
The
Warning Lamp
on top of the Y carriage should be constantly lit (not
flashing).
Observe that
Servo Power
is switched on,
4
Press
Start
to continue.
40
