10
Kongsberg X-series
Machine Connection
->
Machine Configuration
->
Setup
_>
Jog Speed
Specify low and high
Jog Speed
Incremental Jog Step Size
The size of the
Incremental Jog
movements can be customized.
Machine Connection
->
Machine Configuration
->
Setup
_>
Incremental Jog
Specify
Step Size
to be used.
Jog Directions
Machine Connection
->
Machine Configuration
->
Setup
_>
Jog Panel Direction
Use this function to align the
Jog Directions
with the orientation of the
Operator Station
.
10.11. Set Table Top Reference
Menu Bar->Machine->Set Table Top Reference
Follow instructions from the wizard.
Machine Connection
->
Machine Configuration
->
Installation
_>
Table Top Reference
Follow instructions from the wizard.
Machine Panel Toolbar
->
Table Top Reference
Use this function to complete a
Tool Height Reference
calibration.
The
Tool Height
is measured in current position and the reference to the table top surface is updated.
This calibration is the basis for
Tool Height
calculation.
The
Table Top Reference
function should be carried out:
• After mechanical adjustments of traverse or tool head.
• When cutting through material is not working properly.
• After any change of cutting / milling underlay, for instance, after adding or removing the milling
underlay.
Procedure:
1.
Remove all materials from the table surface.
2.
Measure on top of the cutting underlay or conveyor belt.
3.
If the table is equipped with a conveyor belt, avoid measuring directly on the belt junction.
4.
Execute the
Table Top Reference
function.
62
