19
Kongsberg X-series
1.
Jog the
Traverse
to the back of the
Cutting Table
.
2.
Make sure the Automatic Winding Direction switch (A) is turned off.
3.
Make sure the safety disks are closed.
4.
Lock the dancer bar in the upper position, so the web can be easily pushed underneath it. Push the
backside of the dancer all the way down, pull and turn the bolt to secure it into the hole.
5.
Use the Manual Jog (D) to unwind enough material to be able to feed on to the table.
6.
Feed the material through the rolls of the MRF as shown in the picture below:
202
