13
Kongsberg X-series
Use the spanner and the hexagonal screw driver to
fix the blade properly.
Observe the alignment pin in the foot and the
groove in the tool shaft.
Position the foot onto the tool shaft as shown at
left.
Note: This operation has to be carried out after
the tool insert is in place in the tool head.
Push the foot into position. A self-locking
mechanism ensures the foot is kept in place.
Note: Be careful not to hit the sharp knife.
Layer Setup for RotaCut
Correct setting of
Lag
- and
Width
- values are
shown.
Lag
: 3.5 mm / 0.14 inch
Width
: 7.0 mm / 0.28 inch
Use the
Lag
and
Width
parameters to achieve
proper corner cutting.
156
