13
Kongsberg X-series
• The same set of knife adapters can be used.
Replace Knife Blade
Pull out the electrical connection.
Note: Pull using the connector, not just the cable.
Remove the foot by pulling the foot straight out.
Loosen the screw A and replace the knife.
Ensure the knife has correct position relative to
the screw.
Push the knife down while the screw is fixed.
Extreme care should be taken when inserting the
knife foot again.
Keep fingers away from knife as illustrated at left.
13.15.1. Tool adjustment
For this tool, complete the following adjustments:
Parameter
Description
Tool Height
The tool tip should touch the material surface.
Lag Setting
The knife lag depends upon the actual knife blade adapter and knife blade.
Tool Rotation
Adjust tool angle tangential to moving direction.
152
