Multi-zone ART Workstation User Manual Rev. 6.0
19
Figure 11.1
Gas inlet under Single tabletop
Gas pressure for inlet should be 0.4 – 0.6 bar (5.80 – 8.70 PSI) and it must be
kept
stable!
Always use a high-quality pressure regulator for both gases that can be set with the
required precision.
Figure 11.2
Pressure regulator
Connect the CO
2
gas to the CO
2
inlet with a suitable silicone tube. Ensure the tube is
fastened with a clip so that it does not accidentally loosen itself during sudden pressure
fluctuation. Use the supplied 0.2µ HEPA filter on the gas line before the inlet on the Multi-
zone ART Workstation. Notice the flow direction.
Figure 11.3
Gas filter
The CO
2
inlet should be connected to a 5.0% or 6.0% premixed CO
2
.
The gas flow can be controlled digitally with the keys on the tabletop.
The gas will pass through the humidification system.
