ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 78 / 91

78 EMControl Command Set ets-lindgren.com
IEEE 488.2 Mandatory Instruction Set

IEEE commands for Interface Clear and Clear are not
supported.

IEEE status flags in either serial or parallel poll or as a service
request are not supported.

When IEEE communication is used, the first command/request
should be *IDN?\r .
*CLS
Description: Clear Status. Clears all Event Registers summarized in the
Status Byte Register and places the controller in the Operation
Complete Idle State.
Devices: Turntables, towers
Syntax: *CLS
Response: no response, or an error (error number)
Example: Write sd*CLS\n : Clear status registers
See Also: *OPC , *RST , *STB?