ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 71 / 91

ets-lindgren.com EMControl Command Set 71
UH
Description: Changes the upper limit of the device for horizontal polarity. The
specified value must be greater than the lower limit for horizontal
polarization and between
–999 and 999.
Devices: Towers
Syntax: UH [+/
–] XXX

+ : Optional for positive values

–
: Necessary for negative values

XXX : Decimal value for the upper limit to be set in
centimeters. Leading zeroes are optional.
Response: OK , or an error (error number)
Example: Write sdUH 300\n : Set horizontal polarity upper limit to 300 cm
See Also: UH?
UH?
Description: Queries the upper limit of the device for horizontal polarity. The
value returned is in XXX format. Negative values are preceded by
a
–
(minus sign).
Devices: Towers
Syntax: UH?
Response: [
–]XXX
: Value of the upper limit for horizontal polarization in
centimeters
Example:

Write sdUH?\n : Query horizontal upper limit

Read response

Response is 300\n : Horizontal polarity upper limit is 300 cm
See Also: UH