ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 68 / 91

68 EMControl Command Set ets-lindgren.com
TT
Description: Selects turntable mode of operation. Allows the selection of
normal, two speed, and air flotation turntables.
In the air flotation mode of operation, the UP/DOWN is controlled
automatically by the EMControl, assuring that the table is floating
before a movement is made.
This command is intended to allow automated configuration of
the EMControl and should not be used by most programs.
Devices: Turntables, towers
Syntax: TT <NRM/AIR/TWO> <CONT/NONCONT>

NRM : Normal turntable

AIR : Air flotation turntable

TWO : Two-speed turntable

CONT : Continuous rotation turntable

NONCONT : Non-continuous rotation turntable
Response: OK , or an error (error number)
Example: Write sdTT NRM CONT\n : Change device from a tower to a
normal, continuous turntable
See Also: TWR , TYP?