ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 61 / 91

ets-lindgren.com EMControl Command Set 61
SK
Description: Instructs the device to begin seeking the specified target value.
The target must be located between the current upper/clockwise
and lower/counterclockwise limits.
For a continuous rotation turntable or tuner, the device will seek
the target value by the shortest possible path. Thus, a seek from
359.9 to 0.0 will rotate clockwise, not counterclockwise.
See the SKN, SKP, and SKR commands for other ways to control
the seek direction.
Devices: Turntables, towers
Syntax: SK [+/
–] XXX[.X]

+ : Optional for positive values

–
: Necessary for negative values

XXX[.X] : Decimal value for the seek target in centimeters for
towers and degrees for turntables. Leading zeroes are
optional.
Response: OK , or an error (error number)
Example: Write sdSK 100.0\n : Instruct tower boom to seek 100.0 cm or
turntable to seek 100.0 degrees
See Also: SKN , SKP , SKR , TG , TG?