ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 59 / 91

ets-lindgren.com EMControl Command Set 59
SC
Description: Instructs the device to begin scanning between preset lower and
upper limits. The number of scans performed is determined by
the value of cycles (CY) parameter which must be set prior to
issuing the scan command.
Devices: Turntables, towers
Syntax: SC
Response: OK , or an error (error number)
Example: Write sdSC\n : Put device in scan mode
See Also: CY , CY? , SC?
SC?
Description: Queries the device to determine if scan mode is active.
Devices: Turntables, towers
Syntax: SC?
Response:

<active> : Value indicating if scan mode is active for the
queried device
0 : Device is not in scan mode
1 : Device is scanning
Example:

Write sdSC?\n : Ask device if it is scanning

Read response

Response is 1\n : Scanning
See Also: SC