ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 34 / 91

34 EMControl Command Set ets-lindgren.com
Detailed Description of Remote Commands
The following notation is used for each command:
Description: Description of the command function and any associated
special information.
Devices: List of device types this command applies to.

Towers refers to all linear positioning devices.

Turntables refers to all rotational positioning devices
Syntax: cmd <required parameter> [optional parameter]
Parameter list: List of parameters and their descriptions
(as required) with any associated special information.
Response: If applicable, description of expected response from queries,
with any associated special information.
Example: Write sdCMD PARM\n : Command to write or query

s : slot number of the EMControl in the EMCenter

d : the device ID

CMD command

PARM parameters