ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 45 / 91

ets-lindgren.com EMControl Command Set 45
ERE?
Description: Query Device Dependent Error Enable Register. Prepares the
controller to respond with the contents of the Device Dependent
Error Enable Register when queried.
Value returned is an integer number in the range of 0 to 65535.
This value, when expressed in binary form, represents bit values
of the Device Dependent Error Enable Register.
Devices: Towers, turntables
Syntax: ERE?
Response: <ERE bits> : Integer value representing a 16-bit binary number
0
–65535
Example:

Write sdERE?\n : Query ERE register

Read response

Response 64\n : Allow a polarization violation to set the
DDE bit of STB
See Also: ERE , ERR? , *STB?