ERL tesla lite User Manual Download Page 34

Page: 34 / 288

4 Communicating with the Recorder

4-4

TESLA LITE User Manual

D03283R01.10

TESLA Control Panel Setup

1. Ensure that the computer running TESLA Control Panel has access to the

Ethernet network to which the recorder has been connected.

2. Start TESLA Control Panel.
3. Choose the target recorder from the

Select IED

list in TESLA Control Pan-

el’s Main Menu.

• If there is not already an entry for this recorder, create one using the

Add

New

button

Figure 4.2: Edit IED

• The method of communication with the recorder is specified as part of

its IED definition. Use the

Edit

button to view or change this informa-

tion. Ensure the

Network Link

option is selected and the recorder’s IP

address is entered.

Main Menu

Select IED List

Edit button

Edit IED dialogue box

Summary of Contents for tesla lite

































































































































































































































































































Search results

Summary of Contents for tesla lite

Reviews:

ERL tesla lite, User Manual, Page: 34 / 288

Search results

Summary of Contents for tesla lite

Reviews: