manualshive.com logo in svg

ERL tesla lite, User Manual, Page: 14 / 288

Share
Download
ERL tesla lite User Manual Download Page 14

System Requirements

xii

TESLA LITE User Manual

 D03283R01.10

figure your anti-virus/anti-software to classify it as “safe” for its proper oper-
ation. Please consult the appropriate anti-virus/anti-spyware software 
documentation to determine the relevant procedure.

Installing TESLA Control Panel

The user must be logged on to the target computer as a user with local admin-
istrator privileges to install TESLA Control Panel. Once installed, the user may 
be logged in as a Limited User, as administrator privileges are not generally re-
quired for operation of the program. The exception to this is the ability to com-
municate with TESLA LITE  recorders through Modem-LAN Gateway, see “If 
an internal modem was installed at the factory, it will already be appropriately 
configured.” on page 4-13.

Overview

Once these steps are complete, go to the First Time Start-Up section for details 
on launching TESLA Control Panel (see “First Time Start-Up” on page 3-6).

Instructions for installing TESLA Control Panel and configuring Win-
dows for its use are covered in “TESLA Control Panel Installation” on 
page 3-1. 

Summary of Contents for tesla lite

































































































































































































































































































Reviews:

No comments