ERL tesla lite, User Manual, Page: 33 / 288

4 Communicating with the Recorder
D03283R01.10 TESLA LITE User Manual 4-3
4.4 Ethernet LAN Link
Figure 4.1: Ethernet LAN Link
You can access both the recorder’s user interface and DNP3 SCADA services
simultaneously with the Ethernet TCP/IP LAN link through the network port
Port 401. Both front and rear ports 401 are 100BASE-T copper interface with
an RJ-45 connector.
Connect to the LAN using a standard Ethernet cable with RJ-45 connectors.
By default, the Port 401 is assigned with an IP address of 192.168.100.80. If
this address is not suitable, it may be modified using the relay's Maintenance
Menu, see “Maintenance Menu and Error Handling” on page 12-1.
Modify the Default Gateway and Network Mask if necessary.
• The Default Gateway may need to be changed if the recorder and the
control panel (or RecordBase) are on different but connected networks.
The default setting is No Default Gateway.
• The Network Mask may need to be changed if the recorder and control
panel are on different subnets. The default setting is 255.255.255.0
• To modify the Default Gateway or Network Mask use the maintenance
Menu command 1- Modify IP address
• If unsure of these setting contact your network administrator
PC with TCP/IP
Port 401 - RJ-45
Network Port
Port 401 or Port 402
TCP/IP
Network