manualshive.com logo in svg

ERL tesla lite, User Manual, Page: 16 / 288

Share
Download
ERL tesla lite User Manual Download Page 16

1 Overview

1-2

TESLA LITE User Manual

 D03283R01.10

Communication 
Ports

• Front USB to serial COM port (450)
• 100BASE Ethernet with front and rear connectors (401)
• SCADA (404)
• Modem port for internal modem (400)
• Rear COM port (405)
• IRIG-B (403)

Recording

• Simultaneous operation in transient fault, dynamic swing and long term trend 

time frames

• 96 samples/cycle (50/60 Hz) transient fault recording. Transient fault records 

from 0.2 to 10.0 seconds with automatic record extension up to the Maximal 
Record Length seconds under multiple trigger conditions. The Maximal 
Record Length for the transient fault recording is user configurable and is set 
in the 

Utilities>Recording

.

• 60 samples/second (1 sample/cycle) dynamic swing recordings. Dynamic 

swing record from 10 seconds to 15 minutes with automatic record extension 
up to the Maximal Record Length minutes under multiple trigger conditions. 
The Maximal Record Length for the dynamic swing recording is user config-
urable and is set in the 

Utilities>Recording.

• Trend recording for 45 user configurable channels for 15 days at sample in-

tervals from 10 seconds to one hour

• Calculated channels: summations, watts/vars, power factor, positive, nega-

tive and zero sequence components, impedance, fault location, frequency, 
harmonics and logic channels

• Record compression to reduce record size, maximize storage capacity and 

minimize transmission time

Triggers

• Rates and level triggering on all input and calculated channels with individual 

controls for delay, logging, record initiation and alarm contact activation

• Configurable logic can be applied to digital inputs and internal trigger states
• User-assigned trigger priorities help identify critical events and records
• Centralized cross-triggering of dynamic swing recordings through Record 

Base Central Station

SCADA

• TESLA LITE supports DNP3 and Modbus SCADA communication proto-

cols

• Detailed specifications for the DNP 3 and Modbus communications are pro-

vided in the respective appendices.

Summary of Contents for tesla lite

































































































































































































































































































Reviews:

No comments