Epson Stylus Photo 950, Service Manual

Page: 150 / 191

EPSON Stylus PHOTO 950 Revision A
ADJUSTMENT Adjustment 150
†
What kind of parameter will be initialized by this operation
Followings are the all items that EEPROM initialization supports.
1. Setup the adjustment program. Main screen (Figure 5-3) appears.
(Refer to Section 5.2.1.)
2. Select "Adjustment" and then "EEPROM initialization".
3. Following screen appears.
Figure 5-33. EEPROM Initialization Initial Screen
4. Press "O.K." button on the program screen. Then you can see following
acceptance screen.
Figure 5-34. EEPROM Initialization Completion Screen
Table 5-2. All Contents of EEPROM Initialization
No. Items Address
Initial
Setting
After
Initialize
Setting
Contents
Purpose
1 CG Table 17H 08H 08H PC 437 Previously, we input
this value on the
opening screen of the
adjustment program.
2 Font 18H 00H 00H Courier
3 D4 for USB 09H 00H 01H On Since this setting is
input on the assembling
manufactory (not to set
at main board vendor
side), SEC should
prepare this setting
beforehand for the spare
Main board.
4
CSIC Printer
Name
B0H 00H 97H R4C8170
5 Market ID E0H 00H 00H World
Previously, we input
this value on the
opening screen of the
adjustment program.