Epson Stylus Photo 950, Service Manual

Page: 148 / 191

EPSON Stylus PHOTO 950 Revision A
ADJUSTMENT Adjustment 148
4. Select "Readout USB ID", and press "O.K." button on the program screen.
5. Initial screen changes as below.
Figure 5-28. USB ID Readout Screen
6. Write-down the indicated USB ID, and once quit the adjustment program.
7. Replace to new main board.
8. Setup the adjustment program again. Main screen (Figure 5-3) appears.
(Refer to Section 5.2.1.)
9. Select "USB ID", and then "Input USB ID". Then press "O.K." button on the
program screen.
10. Following screen appears.
Figure 5-29. USB ID/Serial Number Input Mode
11. Input the original USB IDs that you wrote-down at step 6, then press "O.K." on the
program screen.
12. Program screen changes as below.
Figure 5-30. USB ID/Serial Number Input Mode 2