Epson Stylus Photo 950, Service Manual

Page: 61 / 191

EPSON Stylus PHOTO 950 Revision A
TROUBLESHOOTING Overview 61
6 Is the EJ roller holder
not secured to the
paper eject roller shaft
and is it loose? Place the EJ roller holder in the correct position.
7 Has the bushing 5 that
secures the paper
eject roller shaft come
away from the hook
and is not rotating
smoothly? Place the bushing 5 in the correct position.
8 Have any of the star
wheels come away
from the paper eject
frame? Place the star wheels in the correct position.
Table 3-6. Countermeasures when a paper out error occurs
Step Check Point Remedy
Lifted EJ Roller Holder
Bush 5
Correct Hook Point
Correct Status
Incorrect Status
9
10
11
Does the PE lever not
work correctly? Move the PE lever at the rear of the printer manually and
check if it returns normally as soon as it is released. If it does
not return, the cause might be one of the following three
reasons.
1. The PE lever has come away from the base.
2. Scraps of paper have collected around the PE lever so that
the PE lever cannot operate correctly.
3. The PE lever itself is broken and cannot detect the paper
feed and paper eject timing correctly.
If the tension spring for the PE lever has come off, reinstall it
while referring to the illustration below.
Table 3-6. Countermeasures when a paper out error occurs
Step Check Point Remedy
Actuator for PE Sensor
PE Sensor
(Photo Coupler Type)
Torsion Spring
PE Lever
PE Lever Base