Epson Stylus Photo 950, Service Manual

Page: 60 / 191

EPSON Stylus PHOTO 950 Revision A
TROUBLESHOOTING Overview 60
Table 3-6. Countermeasures when a paper out error occurs
Step Check Point Remedy
1 Is no paper loaded? Set a cleaning sheet in the ASF up side down. Then holding
the top edge, press the Load/Eject button, and the micro pearl
on the paper load roller (a semicircular roller) surface is
removed. To remove severe smear, staple a cloth moistened
with alcohol to a post card and clean the roller in the same
manner.
NOTE: Customers must never use cleaning sheets with this
printer. The procedures described here is for use
only by qualified technicians when carrying out
repairs.
2 Has the hopper come
away from the ASF? If the two hooks that secure the hopper to the ASF are not
correctly attached, insert the hooks correctly into the holes in
the ASF.
Non-adhesive Area
CL Sheet
Adhesive Area
This side down
Staplers
Cloth moistened
with alcohol
(Use a post card
for the base sheet.)
Hooks
3 Is there any paper
lodged in between a
paper load sub roller
and the PF roller? Clean away any paper or other foreign particles that may be
caught in the rollers.
4 Is the PF roller
bushing dislodged
from the mechanism
and not rotating
smoothly? Return the bushing to the correct position.
5 Is the PF roller
bushing dislodged
from the mechanism
and not rotating
smoothly? Use a cloth moistened with alcohol to clean away severe
contamination. If the PF roller is damaged, it should be
replaced.
Table 3-6. Countermeasures when a paper out error occurs
Step Check Point Remedy
Slip of paper or foreign substance.
Correct Location
Busing for PF Roller Shaft
Many Paper Powders or a Big Scratch Marks
on the PF Roller Shaft