Using Roll Paper
48
3
3
3
3
3
3
3
3
3
3
3
3
4. If the cutter is attached, select the types of cutting from
Auto
Cut
list box.
The
Auto Cut
settings are as follows:
Note:
❏
Use the cutter after you attach it and adjust the cutting position.
Refer to the “Cutting position adjustment with Automatic Roll
Paper Cutter” on page 176 for more details about the cutting
position adjustment.
❏
Auto Cut
is selectable after the cutter is attached and Roll
Paper is selected as the
Paper Source
setting.
Not Cut
No cutting with the cutter is done.
Single Cut
The paper is cut at the boundary between images
(the boundary between pages). However, the
cutting position may shift slightly.
Double Cut
If you have selected Single Cut and are unhappy with
the gap of the cutting position, select Double Cut. In
this mode, the space between images is extended
and the paper is cut twice inside this space. By
cutting twice, an 18 mm slip of paper is left. Double
Cut is selectable only when printing with No Margins
selected.
