Printing with Windows
154
6
6
6
6
6
6
6
6
6
6
6
6
Making Settings on the Layout Menu
You can make Reduce/Enlarge, Double-Sided Printing,
Multi-Page, and Watermark settings on the Layout menu. Refer
to the appropriate section below.
Roll Paper
Option
The Roll Paper Option settings are only available when
Roll Paper is selected as the Paper Source setting.
These features are not available when Sheet Feeder
or Manual Feed Slot is selected.
The available settings are described below.
Banner Mode:
Select this mode when you want to print multi-page
data as continuous data on the roll paper, rather than
as individual pages. When this check box is selected,
the Save roll paper check box is enabled.
Cut Sheet Mode:
Select this mode when you want to print multi-page
data as individual pages, rather than as continuous
data. When this check box is selected, the Print page
frame check box is enabled.
Save roll paper:
Select this check box when you want to save roll
paper. When this check box is selected, the blank
portion of the last page of your document is not fed
through the printer. This feature is only available when
Not Cut and Banner Mode are selected, and not
available when cutting with the cutter.
Print page frame:
Select this check box to print a line on the roll paper
between pages in a multi-page document to indicate
where the paper should be cut. This feature is useful
when it is unclear where the page breaks should be or
where the paper should be cut after the last page has
been printed. This feature is only available when Not
Cut and Cut Sheet Mode are selected, and not
available when cutting with the cutter.
