Epson SC-P10000 SERIES User Manual Download Page 52

Page: 52 / 217

Move the support bar to position A.

For the A position, see the label attached to the
stand section.

Press the

button after moving the support bar.

Match the tensioner to the width of the wound
paper.

“Using the Tensioner” on page 53

Place the tensioner in the slack part of the roll
paper.

See the following section for information on
paper that requires the tensioner.

“Epson Special Media” on page 179

Printed side out

Printed side in

Align flange R for the tensioner with the right
end of the paper.

Move flange L for the tensioner to create a gap
of approximately 5 mm from the left end of the
paper.

SC-P20000 Series/SC-P10000 Series User's Guide

Basic Operations

Summary of Contents for SC-P10000 SERIES


























































































































































































































Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands

Epson SC-P10000 SERIES, User Manual

Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands