Item
Description
Add Margins
The position at which the margin is added depends on the
Output
Size
setting, as shown below.
❏
When set to
Auto
The result is the same as when
Standard
is selected.
❏
When set to a standard size or
User Defined
Adds 3 mm of margin (area of
in the following illustration)
outside the size selected for
Output Size
(area of
in the
following illustration). Actual output size becomes larger than
the selected size (area of
in the following illustration) due to
addition of the margins.
When the created data size does not fit in the output size, data
is reduced before printing.
Clip By Margins
Adds 3 mm of margin (area of
in the following illustration) inside
the data size (paper size or image size) or the size selected for
Out-
put Size
(area of
in the following illustration) depending on the
Output Size
setting. When there is a print object in the margin sec-
tion, it is clipped and not printed.
When the output size setting is configured to a standard size or user
defined size and the created data size does not fit in the output size,
data is printed with reduced size. However, when there is a print ob-
ject in the margin section as a result of the reduction, it is clipped
and not printed.
SC-P20000 Series/SC-P10000 Series User's Guide
Using the Control Panel Menu
136
