Epson SC-P10000 SERIES User Manual Download Page 152

Page: 152 / 217

Close the cartridge cover.

Important:

We recommend that you remove and shake the
installed ink cartridges once every three months to
ensure print quality.

Replacing Maintenance Boxes

If the message

No Enough Space

is displayed, replace

the target Maintenance Box.

Supported Maintenance Boxes

“Options and Consumable Products” on

page 179

Important:

Do not reuse maintenance boxes that have been
removed and left out in the open for a long period
of time. The ink on the inside will be dry and hard
and will be unable to absorb enough ink.

How to replace

There are three maintenance boxes in the SC-P20000
Series and two in the SC-P10000 Series, but the
replacement procedure is the same for all of them.

Important:

Do not replace the maintenance boxes while
printing. Waste ink may leak.

Open the maintenance box cover.

Pull out the maintenance box.

Lifting the maintenance box up releases the
lock, and you can simply pull it straight out.

Place the used maintenance box in the clear bag
included with your new maintenance box, and
make sure that the zipper is closed tight.

SC-P20000 Series/SC-P10000 Series User's Guide

Maintenance

152

Summary of Contents for SC-P10000 SERIES


























































































































































































































Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Related manuals for SC-P10000 SERIES

Brands by name

Popular brands

Epson SC-P10000 SERIES, User Manual

Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Related manuals for SC-P10000 SERIES

Brands by name

Popular brands