Epson SC-P10000 SERIES User Manual Download Page 42

Page: 42 / 217

Turn on the printer by pressing the

button.

Note:

After finishing operations, return the support bar
to the storage position.

Press the

button on the control panel. Press

the

button to highlight

Poster Board

and

press the

button.

Pull out while lifting the poster board support.

While aligning the edge of the board along the
inner projecting support, insert it with the
printable side facing up.

Note:

If the paper gets stuck and cannot be inserted,
remove it until you see the leading edge of the
poster board, and then insert it again.

Insert the board, checking to be sure that it
passes under the rollers.

SC-P20000 Series/SC-P10000 Series User's Guide

Basic Operations

Summary of Contents for SC-P10000 SERIES


























































































































































































































Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands

Epson SC-P10000 SERIES, User Manual

Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands